MyBinding DRYLAM SL Instruções de Operação descarregar pdf (Página 31)

- 31 -

Take out the cutting stick with a small screw-

driver. If needed the cutting stick can be turned

or exchanged. (The cutting stick can be used

eight times).

•

Blade and cutting stick replacement

•

Replacing the cutting stick (not the blade).

• Turn the blade adjusting screw (A) to the left

until it stops. (Otherwise the first cut will be

too deep).

• Remove the cutting stick according to top

picure.

• Turn the cutting stick (the non-used side

must be near to the blade) and plug it into the

holding bolt.

Danger! Risk of injury!

Cutting test after replacing the cutting stick

(not the blade)

• Insert the paper and release the cut.

• If the last sheet of paper is not cut along the

entire length turn the blade adjusting screw

(A) ¼ turn to the right.

• If the last sheet is still not completely cut

repeat this process until the last sheet is cut

along the entire length.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Sem comentários

MyBinding DRYLAM SL Instruções de Operação Página 31